|
AirBlade Air Knife, X-Stream™ AirBlade
Air Knife, Curved AirBlade Air Knife, Air
Knives, Air Knife From Nex Flow™ |
| Airblade
Air Knife dramatically reduces compressed
air and noise levels as compared to other
blow-off products. Airblade
Air Knives provide a compact and efficient
means to dry, clean and cool materials. Airblades
operate by entraining the surrounding air
along with the compressed air utilizing the
“coanda” effect essentially converting
energy which would normally be lost as noise
and pressure drop into useful flow. No matter
what anyone tells you, all Airblade
Air Knives or Airblade
Air Knife that use the coanda effect are
essentially the same in performance with negligible
differences. However, how they are made is
what is very important to make sure you get
value for your money. |
 |
| Standard
Airblade Air Knife |
|
| |
|
Air
Consumption approx. 3.4 SCFM (82 SLPM)
per inch (25.4 mm) at 80 psig (5.5 bar)
with force and noise levels comparable
to standard Airblade
Air Knives or Airblade
Air Knife of all types (approx.
2.7 oz (77 grams) and 83 dBA at 80 psig
or 5.5. bar and 6” (152 mm) from
the target. Read
More... |
|
|
| X-STREAM™
Airblade Air Knife |
|
| |
|
Air
Consumption approx. 2.9 SCFM per inch
at 80 psig with force and noise levels
comparable to standard Airblade
Air Knives or Airblade
Air Knife of all types (approx.
2.7 oz (77 grams) and 83 dBA at 80 psig
or 5.5. bar and 6” (152 mm) from
the target. The X-Steam™
Airblade Air Knife is normally the
best choice due to very low noise levels
and it uses less air than a standard
Airblade
Air Knife at the same pressure.
However the standard unit is lower in
cost and has a slightly higher force
at the same pressure. Either version
may be mounted end to end for longer
lengths of continuous flow. Read
More... |
|
|
| Curved
Airblade Air Knife |
|
| |
|
The new
X-Stream™
Curved Airblade Air Knife is easy
to mount and maintain and reduces both
compressed air consumption and noise
levels. It’s curved design produces
an expanding, powerful blast of air
in a fan shape to blow off wide areas
and can minimize air use using longer
air knives.
Developed to address areas with limited
space to flow off a large area. As with
regular X-Stream™
Curved Airblade Air Knife, The X-Stream™
Curved Airblade Air Knife produces
a “laminar” flow of air
along its curved face using the “Coanda”
effect which entrains a large volume
of air knife from the surrounding area
along with a small amount of compressed
air to produce an output flow up to
40 times. Read
More... |
|
| |
 |
All
our Airblade
Air Knives or Airblade
Air Knife are full flow which
means they can be put end to end for
continuous flow and takes up less space
in tight areas. Even one competitor’s
so-called full-flow standard answer
to our Nex
Flow™ standard airblade
air knife
is not nearly as efficient as ours by
their own published values and is only
a small, flimsy version in comparison.
|
| |
|
|
All
our Airblade
Air Knives or Airblade
Air Knife come with a stainless
steel shim to maintain the gap for the
compressed air to exit. Many companies
use plastic shims which may be “squeezed”
for uneven flow but more important,
no matter how clean you make the compressed
air line, the plastic will wear. Plastic
shims are one of the biggest complaints
customers have with air
knives – Nex
Flow™ however use
stainless steel shims as a standard
in all Airblade
Air Knives or Airblade
Air Knife.
|
| |
|
|
Easy
mounting. Some air
knife designs are difficult to mount
and require dismantling, often effecting
flow and making the job of mounting
more difficult. All Nex
Flow™
air
knives have convenient mounting
holes. |
| |
|
|
All
Nex Flow™
aluminum air
knives are anodized while many competitors
do virtually nothing to the aluminum
for protection. In fact, if you want
any better protection they try to get
you to buy more costly stainless steel
when simple anodizing is less costy
and already “standard” with
Nex
Flow™.
|
| |
|
|
Flexibility
in connections. Except for the very
short lengths, both standard and X-stream™
versions have compressed air ports at
the ends and the back for flexible choice
in air input. |
| |
|
 |
| |
| Nex
Flow™
is your worldwide source for quality products
related to specialized air flow applications,
in particular air moving, air amplification,
air conveying and air cooling. Our aim is
to provide the highest quality product at
the lowest, competitive price with technical
support as required and to address manufacturing
operations in order to improve productivity
and safety. |
|
| If
there is a distributor in the area you will
be referred to them to contact you with pricing.
|
|
|
Mailing Addresses of Nex Flow™
Air Products Corp. |
| Nex
Flow™
Air Products Corp. 300 International Drive,
Unit 100 Williamsville, NY, 14221 |
|
| Nex
Flow™
Air Products Corp. 10520 Yonge Street, Unit
35B-220 Richmond Hill, ON, Canada, L4C 3C7
|
|
For
Sales:Email
Sales |
For
Orders:Email
Orders |
